E-commerce: Product/Category List
Dual Motion Sensor 95 Watt UVC Surface Sanitizer with Remote Control

Dual Motion Sensor 95 Watt UVC Surface Sanitizer with Remote Control

We are proud to introduce our GermawayUV 95 watt UVC surface sanitizer featuring dual motion sensors and remote control.  Manufactured here in the USA at our Delray production facility where we are working tirelessly to bring all our production stateside.  Our original 95 watt tabletop sanitizer is extremely popular, but this new and improved model has taken it a stage further.  Listening to our customers suggestions we have added the ability to operate the unit remotely, using a radio frequency controller you do not have to be in the same room or in line of sight to use it.  A dual motion sensor turns the unit off immediately if a person or pet is detected in the room adding another level of safety.

  • Radio frequency remote control.
  • Start/Stop and runtime selection by remote control or inbuilt buttons.
  • 7 different preset times from 5 to 60 minutes or continuous run.
  • Digital display for status and run time indication.
  • Dual, motion sensors for additional safety.
  • 95 watts UVC bulb.
  • Improved finish to the cage.
  • On/off/reset button.

GermawayUV is a leader in the design and innovation of sterilization units, and proud to be a front runner in the battle to destroy the pathogens that exist in all rooms and on hard surfaces.  UVC light targets harmful micro-organisms such as viruses, salmonella, colds, flu and pneumonia, and also molds and fungi.  This unit is the perfect sanitizing solution for either home use or a wide variety of industries.

  • Power Supply: 120VAC/60Hz
  • Usage: Plug and play supply hub
  • Wattage: 95W
  • Lamp Length: 21.06" (535mm)
  • Peak UV Output: 253.7nm
  • Dimensions: 9" x 6.5" x 24"
  • EPA Product Registration Number: 94850-DV-1 
  • EPA Establishment Number for our production facility: 94850-FL-1

Quick STARTUP Guide:

    1. Place the device on a table surface making sure that all the items you want to sanitize are exposed.
    2. Clear the room of any people, pets and plants.
    3. UV light is harmful to your eyes – you should avoid exposure at all times. So we’ve included a free pair of safety glasses with this device. Put these on.
    4. Switch the Power Button to the "Reset" position.
    5. Set the Timer. This can be done by either pressing the up and down buttons on the unit or the "A, up", "B down" on the remote. The device has 7 preset times:- 5, 10, 15, 20, 30, 45 and 60 mins or "Infi" for continuous.
    6. Once the desired time is displayed, press the "Play" button or "D"
    7. Leave the room. The system will give you approximately 15 seconds to leave the room. Wearing your UV glasses, leave the room and close the door behind you.
    8. After the selected dosage time has elapsed, the device will automatically shut off.
    9. If you wish to stop the unit, press the "C" button on the remote or the "Stop" button on the unit
    10. Air the room out for 10 minutes to clear the slight odor that results from UVC sanitation.
    11. Enjoy a sanitized space!